6月8日成都方管市场价格或继...
  6月8日长春镀锌方管市场价格...
  6月8日上海镀锌方管市场价格...
  6月8日石家庄方管价格行情暂...
  明日方管价格仍维持稳中回调走...
  唐山方管价格将延续稳中微调格...
  夏季到来热镀锌方管市场将迎来...
  本地方管价格将继续坚挺略微向...
  市场成交改善短期Q345B方...
  高供应、低需求依然继续影响未...
 
    您会用百度搜索什么关键词找矫直机厂家?
矫直机
矫直机厂家
精密矫直机
液压矫直机
异形钢矫直机
滚光矫直机组
矫直机供应商
求购矫直机

  
 
当前位置 -> 首页行业知识解决环氧地坪漆施工不平整的补救措施 发布时间:(2018/11/5)关键词:矫直机

解决环氧地坪漆施工不平整的补救措施

----------------------------------------------------------------------------------------------------------------------

环氧地坪漆是陆地的保护膜,它占有较高的附着力以及负载性,并兼具强韧耐磨、抗压、抗渗、防腐、光亮、本钱经济、易干净等优势.环氧地坪专家分析,环氧树脂地坪漆的厚度能够是0.5-5MM不等,相对于水泥混凝土几面5-25CM是很薄的一层,于是它的耐压以及平坦性重点仍然依托混凝土基面.

Epoxy floor paint is a kind of protective film on land. It possesses high adhesion and load resistance. It also has the advantages of toughness, abrasion resistance, compression resistance, impermeability, anti-corrosion, brightness, cost-effectiveness and cleanliness. According to the analysis of floor experts, the thickness of epoxy floor paint can be 0.5-5MM, which is very thin compared with 5-25CM on several sides of cement concrete. As a result, its pressure and flatness still rely on the concrete base. 

咱们晓得,通常来说,环氧地坪漆要求基面平坦度在二米界线之内,选用2M的靠尺实行丈量,并且落差无法超出2MM.可是并不是任何项环氧地坪漆工程都能做到完美无缺,在环氧地坪漆平坦度达不到准则的状况下.

We know that, generally speaking, epoxy floor paint requires that the flatness of the base surface should be within the 2-meter boundary, and 2M footage should be used to measure the flatness of the base surface, and the difference can not exceed 2MM. However, not every epoxy floor paint project can achieve perfect flatness, under the condition that the flatness of the epoxy floor paint does not meet the criteria.

环氧地坪漆基面落差大于5MM时,通常咱们会选用打磨机实行打磨,那用打磨机实行找平,或用环氧树脂地坪漆中涂刮砂找平本钱将是庞大的,并且砂层厚度过高会对环氧地坪漆功能形成肯定波及.

When the difference between the base surface of epoxy floor paint is greater than 5MM, we usually use a grinder to grind. The cost of leveling with a grinder or scraping sand in epoxy floor paint will be huge, and the high thickness of sand layer will definitely affect the function of floor paint.

环氧地坪漆基面落差小于5MM时,通常咱们会采用下面两种解决方案以供参考:打磨机打磨找平.运用打磨机,将最高点打磨与低点平行能够.

When the difference of epoxy floor paint base surface is less than 5MM, we usually adopt the following two solutions for reference: grinding leveling by grinding machine. Using grinding machine, the highest point can be grinded parallel to the lowest point.

但这类方式通常只能用于较厚的环氧地坪漆品种,如环氧树脂沙浆地坪,在环氧地坪漆施工中涂时,在刮砂这道工序时,以地坪漆与石英砂实行夹杂,填充混凝土基面基面,完成找平的功效.

But this kind of method can only be used for thicker epoxy floor paint varieties, such as epoxy resin mortar floor paint, in the construction of epoxy floor paint, in the process of scraping sand, the floor paint and quartz sand are mixed to fill the concrete base surface, to complete the leveling effect.



版权所有@转载请注明:http://www.wxsjjg.com/shownews.asp?id=277

上一条>> 下一条>>
本站网址:http://www.wxsjjg.com 来源:盛杰精工  浏览次数:980 
相关阅读:
厂家揭示环氧地坪涂料的环保特点
关于环氧地坪日后的保养与维护问题
环氧地坪在地下停车场的施工布置方法

版权所有:无锡市盛杰精工机械有限公司   地 址:无锡市新区城南路236号   电 话:0510-85602402    传 真:0510-85602238   
手 机 : 13951501116 18662682255      联系人:钱先生     邮 箱:wxsjjg@126.com    网 址:www.wxsjjg.com
    备案号:苏ICP备11086009号      技术支持:无锡易商科技   友情链接:矫直机 网站地图