水性环氧地坪漆施工方法：水性环氧地坪漆在施工方面与溶剂型环氧地坪漆的步骤大致相同，主要分为底涂、半途、批补、面涂和养护。1、底涂。将混凝土基材处理完毕并清理干净后就可进行底涂(辊涂或刷涂)，辊涂或刷涂应平均，厚薄一致。该底涂具有一定的透水汽功能，能增强基材强度并增加涂层对基材的附着力。

Waterborne epoxy floor paint construction method: Waterborne epoxy floor paint in the construction of the same steps as solvent-based floor paint, mainly divided into primer, half-way, patch, surface coating and maintenance. 

1. Primer. After the concrete substrate is treated and cleaned up, it can be primed (roll or brush). The roll or brush should be uniform in thickness. The primer has a certain water vapor permeability function, can enhance the strength of the substrate and increase the adhesion of the coating to the substrate.

2、中涂。在已配好的水性环氧涂料(中涂)中加入石英砂和石英粉配成水性环氧砂浆，用镘刀将其平均涂布，用于增加厚度及涂层抗压强度。

2. China coating. Waterborne epoxy mortar was prepared by adding quartz sand and quartz powder into the prepared waterborne epoxy coating (intermediate coating). The mortar was evenly coated with a trowel knife to increase the thickness and the compressive strength of the coating.

3、批补。中涂后用砂纸打磨环氧地坪，并用水性环氧涂料(中涂)与石英粉配成的腻子依实际需要施工数道，要求达到平整无孔洞，无批刀印和砂磨印为准。

3. Batch. After intermediate coating, sandpaper is used to polish the floor, and putty made up of water-borne epoxy paint (intermediate coating) and quartz powder is applied several times according to actual needs. It is required that the floor is smooth without holes, without batch knife printing and sand grinding.

4、面涂。用辊涂将水性环氧地坪涂料面涂辊涂两道，完工后要求整体地面光泽柔和、洁净、颜色均一、无空鼓。

4, surface coating. The water-borne epoxy floor coatings are coated by roller with two rolls. After completion, the whole floor is required to be smooth, clean, uniform in color, and no empty.

5、养护。面层实干需要24H，在这期间应进行封锁，比免影响表面洁净光滑的效果。3D后方可上人，完工保养7天后方可正式投入使用(25℃为准，低温时需适度延长)

5, conservation. The surface layer needs 24H, which should be blocked during this period, which is more smooth and smooth than the surface. It can be put into use after 7 days of maintenance (25 C, moderately prolonged at low temperature)