如何选择适当功率成都收账燃气燃油热风炉呢？近年来，随着对环境问题成都找人公司不断提高，燃煤热风炉正逐渐被取代，随着燃气燃油热风炉市场成都收账逐渐扩大，人们收账目光也转移到了燃油，天然气热风炉了。由于燃气燃油热风炉成都找人公司复杂性和新颖性，很多人不明白的问题，它设备的类型。选择小，就不能发挥正常的工作能力;选大了，浪费燃料。那么，你如何根据热风炉的实际需求，选择适当的功率的燃气燃油热风炉呢？

How to choose a suitable fuel gas hot stove? In recent years, with the continuous improvement of environmental problems, coal-fired hot stoves are gradually replaced. With the gradual expansion of the gas-oil-fired hot stoves market, people's attention has shifted to oil-fired, natural gas hot stoves. Because of the complexity and novelty of gas-fuel hot air stove, many people do not understand the problem, the type of equipment. If you choose a small one, you will not be able to perform your normal working ability. So, how do you choose the appropriate power of gas-fuel hot stove according to the actual demand of hot stove?

1、厂家的选择

1. Manufacturer's choice

燃烧器主要是进口或国产燃烧器。 进口燃烧机的主要特点是技术成熟、精细化程度高、高效环保、质量好（安全性高，系统稳定），但同时价格也高。国产燃烧器系统不成熟、稳定性差、热效率低，但是价格低。

The burner is mainly imported or domestic burners. The main characteristics of imported burners are mature technology, high degree of refinement, high efficiency, environmental protection, good quality (high safety, stable system), but also high price. The domestic burner system is immature, poor stability and low thermal efficiency, but the price is low.

我们一般建议选用进口燃烧机：主要是考虑稳定性、安全性、高效等因素。

We generally recommend imported combustion engines: mainly considering stability, safety and efficiency.

2、燃料选择

2. Fuel selection

燃烧器根据燃烧的燃料不同主要分为：

The burner is mainly divided into:

1、燃油系列：轻油如利雅路REG系列 ，重油如利雅路RN系列；

1, fuel series: light oil such as REG series, heavy oil such as Riya road RN series;

2、燃气系列：一段火如利雅路GAS系列 ；两段火如利雅路RS/M系列 ；

2, gas series: a section of fire such as the GAS series of Riya road; two stages of fire, such as the RS/M series of Riya road;

3、双燃料（油气）系列： 如利雅路RLS系列\ENNW/EMMW系列；

3, dual fuel (oil and gas) series: such as RLS series \ENNW/EMMW series.

用户可根据自身经济实力及燃料供应情况做出选择。

Users can choose according to their own economic strength and fuel supply.

3、型号选择

3. Model selection

型号选择的方式主要是根据燃气燃油热风炉的热功率来选择燃烧机的热功率（由燃烧机热功率再确定型号）

The mode of model selection is mainly based on the thermal power of the gas-oil-fired hot blast stove to select the thermal power of the burner (which is determined by the thermal power of the burner).

燃烧器功率的计算方式：燃烧器功率=热风炉功率/热效率

Calculation method of burner power: burner power = hot stove power / thermal efficiency

确定了燃烧机型号，还要根据实际需要选择适合燃烧机的压力和流量

The type of combustion machine is determined, and the pressure and flow rate suitable for the combustion machine are selected according to actual needs.

燃气燃烧器：要求燃气流量[m3n/h]=(燃烧器功率[KW]×3.6)/[气体热值MJ/ m3n]；

Gas burner: requires gas flow rate [m3n/h]= (burner power [KW] * 3.6) / [gas calorific value MJ/ m3n];

燃油燃烧器：燃油流量的需求量[Kg/h]= (燃烧器功率[KW]×3.6)/燃油热值[MJ/ Kg]。

Fuel burner: fuel flow demand [Kg/h]= (burner power [KW] * 3.6) / fuel calorific value [MJ/ Kg].

为燃气和双燃料燃烧器选择阀组（主要针对燃气热风炉）：

Select valve sets for gas and dual fuel burners (mainly for gas hot stove):

使用气阀组选择表来选配足够口径的阀组，请注意，气阀组选择表的数值是以热风炉背压为0时的数据。在选择气阀组时必须将实际燃气压力减去热风炉背压来选择阀组。气阀组选择表的燃气是天然气。

Use the valve group selection table to select the valve group with sufficient caliber. Please note that the value of the valve group selection table is based on the data when the back pressure of the hot blast stove is 0. When selecting the valve group, the actual gas pressure must be subtracted from the backpressure of the hot blast stove to select the valve group. The gas of the valve group selection table is natural gas.

3、核对燃烧器的连接尺寸，特别是燃烧头需要适合成都找人公司，燃烧头的长度在成都收账公司内应该是燃烧头突出耐火喉口10-20毫米。 在火焰尺寸图中核对火焰尺寸，请务必注意火焰不能碰到炉壁。

3. Check the size of the burner connection, especially the burner head, which should be 10-20 mm in length with the burner head protruding from the refractory throat in the hot blast stove. Check the flame size in the flame size diagram. Be sure that the flame can not touch the furnace wall.

综上，客户根据自身的实际情况结合科学选择方式综合考虑，确保选购到高效、节能稳定性高，适合自身的燃气燃油成都收账公司。

In summary, the customer according to their own actual situation, combined with scientific selection of comprehensive consideration, to ensure that the purchase of high efficiency, high energy-saving stability, suitable for their own gas-oil-fired hot blast stove.